[DOSEMU Logo]
DOSEMU.org

| Home | | Developer Releases | | Stable Releases | | Documentation |

Home
README  - 0.97.10
Technical README
HOWTO
DANG
EMUfailure
Misc
Next Previous Contents

18. Using Windows and Winsock

This is the Windows Net Howto by Frisoni Gloriano <gfrisoni@hi-net.it> on 15 may 1997

This document tries to describe how to run the Windows trumpet winsock over the dosemu built-in packet driver, and then run all TCP/IP winsock-based application (netscape, eudora, mirc, free agent .....) in windows environment.

This is a very long step-by-step list of operation, but you can make little scripts to do all very quickly ;-)

In this example, I use the dosnet based packet driver. It is very powerful because you can run a "Virtual net" between your dos-windows session and the linux, and run tcp/application application without a real (hardware) net.

18.1 LIST OF REQUIRED SOFTWARE

  • The WINPKT.COM virtual packet driver, version 11.2 I have found this little tsr in the Crynwr packet driver distribution file PKTD11.ZIP
  • The Trumpet Winsock 2.0 revision B winsock driver for windows.

18.2 STEP BY STEP OPERATION (LINUX SIDE)

  • Enable "dosnet" based dosemu packet driver:
          cd ./src/dosext/net/net
          select_packet      (Ask  single or multi ->  m)
    
  • Make the dosnet linux module:
          cd ./src/dosext/net/v-net
          make
    
  • Make the new dosemu, with right packet driver support built-in:
          make
          make install
    
  • Now you must load the dosnet module:
          insmod ./src/dosext/net/v-net/dosnet.o
    
  • Some linux-side network setup (activate device, routing). This stuff depends from your environment, so I write an example setup.

    Here you configure a network interface dsn0 (the dosnet interface) with the ip address 144.16.112.1 and add a route to this interface.

    This is a good example to make a "virtul network" from your dos/windows environment and the linux environment.

          ifconfig dsn0 144.16.112.1 broadcast 144.16.112.255 netmask 255.255.255.0
          route add -net 144.16.112.0 dsn0
    

18.3 STEP BY STEP OPERATION (DOS SIDE)

I suppose you know how to run windows in dosemu. You can read the Running Windows document if you need more information. Windows is not very stable, but works.

  • start dosemu.
  • copy the winpkt.com driver and the trumpet winsock driver in some dos directory.
  • start the winpkt TSR. (dosemu assign the 0x60 interrupt vector to the built-in packet driver)
            winpkt 0x60
    
  • edit the trumpet winsock setup file trumpwsk.ini. Here is an example of how to setup this file: (I think you can use less parameters, if you have the time to play with this file. You can also setup this stuff from the winsock setup dialog-box).
            [Trumpet Winsock]
            netmask=255.255.255.0  <-- class C netmask.
            gateway=144.16.112.1   <-- address in the default gateway.
            dns=www.xxx.yyy.zzz    <-- You must use right value for the dns.
            domain=hi-net.it
            ip=144.16.112.10       <-- Windows address in the dosnet.
            vector=60              <-- packet driver interrupt vector.
            mtu=1500
            rwin=4096
            mss=1460
            rtomax=60
            ip-buffers=32
            slip-enabled=0         <--- disable slip
            slip-port=2
            slip-baudrate=57600
            slip-handshake=1
            slip-compressed=0
            dial-option=1
            online-check=0
            inactivity-timeout=5
            slip-timeout=0
            slip-redial=0
            dial-parity=0
            font=Courier,9
            registration-name=""
            registration-password=""
            use-socks=0
            socks-host=0.0.0.0
            socks-port=1080
            socks-id=
            socks-local1=0.0.0.0 0.0.0.0
            socks-local2=0.0.0.0 0.0.0.0
            socks-local3=0.0.0.0 0.0.0.0
            socks-local4=0.0.0.0 0.0.0.0
            ppp-enabled=0            <-------- disable ppp
            ppp-usepap=0
            ppp-username=""
            ppp-password=""
            win-posn=42 220 867 686 -1 -1 -4 -4 1
            trace-options=16392
            
            [default vars]
    
  • Now you can run windows, startup trumpet winsock and ..... enjoy with your windoze tcp/ip :-)

Gloriano Frisoni. <gfrisoni@hi-net.it>


Next Previous Contents
 
The DOSEMU team